System-Kompaktor
- From 3 m to 16 m working width
- Tractors between 75 - 732 hp | 55 - 539 kW
- Passive seedbed combinations
Seedbed combination for optimum work results after only one pass
The Kompaktor is the ideal machine for preparing a finely cultivated, well reconsolidated seedbed with an even depth. This provides the basis for an even establishment, particularly of fine seeds like sugar beet and rape seed, and thus achieving high yields.
Contact your dealer!The System-Kompaktor
- Optimum crumbling and reconsolidation
- Even working depth
- Perfect levelling
- Safe road transport
System-Kompaktor
Combine depending on your needs!
Multiple combinations of tools and rollers provide optimum cultivation and reconsolidation of the seedbed.
There is a choice of duck foot or gamma tines, and hollow tube or flat bar rollers can be selected according to preference.
Even due to parallelogram
The suspension of the tine sections in a parallelogram ensures precise guidance and therefore even working depth.
Set the levelling bar hydraulically
The feeding of earth into the rollers is controlled via the hydraulically adjustable levelling bar for changing soil conditions. The leading levelling bar levels the surface.
Safe on the road
All foldable System-Kompaktors with working withs from 4 metres are hydraulically folded to a transport width of less than 3 metres. The semi-mounted system from 5 metres working width provides fast and safe road transport.
Select a model
- S = Rigid version
- K = Foldable
- KA = Foldable, semi-mounted
- GFS = Duck-foot shares
- GFSU = Duck-foot shares with Non-Stop overload safety device
- GAM = Gamma tines
Technical data
| System-Kompaktor S 300 GFS | System-Kompaktor S 300 GFSU | System-Kompaktor S 300 GAM | System-Kompaktor S 400 GFS | System-Kompaktor S 400 GFSU | System-Kompaktor S 400 GAM | |
|---|---|---|---|---|---|---|
| Working width (cm) | 300 | 300 | 300 | 400 | 400 | 400 |
| Power requirements (hp) from - to | 75 - 115 | 75 - 115 | 75 - 115 | 95 - 155 | 95 - 155 | 95 - 155 |
| Power requirements (kW) from - to | 55 - 85 | 55 - 85 | 55 - 85 | 70 - 114 | 70 - 114 | 70 - 114 |
| Weight (kg) | 1 430 | 1 505 | 1 535 | 1 650 | 1 750 | 1 805 |
| Article number | 728 1100 | 728 1102 | 728 1103 | 728 1104 | 728 1105 | 728 1106 |
| Number of sections | 2 x 1,5 m | 2 x 1,5 m | 2 x 1,5 m | 2 x 2,0 m | 2 x 2,0 m | 2 x 2,0 m |
| Number of tines | 12 | 12 | 24 | 16 | 16 | 36 |
Basic equipment
- Lower link attachment 3 m: Cat. 2 (or Cat. 3N=L2 Z3 or Cat. 3) 4 m: Cat. 3N=L2 Z3 (or Cat. 3)
- Box section frame with spring steel carrier arms
- Flat bar crumbling rollers Ø 270 mm with cutting bars
- Height adjustable side plates
- Crosskill rollers Ø 400 mm at the rear with draw rods
- Harrow sections with duck-foot shares or Gamma tines
The availability and basic equipment of the machine may vary depending on the country. Please contact your dealer.
