Zirkon 10
The rotary harrow for maximum constant load in all tilling procedures
The Zirkon 10 is suitable for maximum constant load both in conventional and conservation-tillage procedures. The active tools of the Zirkon 10 prepare an optimum seedbed in almost all soil conditions up to a working depth of approximately 15 cm. The intensity of preparation can be specifically adjusted by selecting appropriate combinations of forward travel speed, PTO speed, and the transmission setting of the rotary harrow.
- The permanently welded gear trough made from hardened, thick-walled steel, ensures the smooth and quiet running of all gears, shafts and bearings. This, in turn, guarantees a long operational life.
- The DUAL-Shift transmission enables simple adjustment of the tine speed from 330 to 440 rotor revolutions per minute. In addition, the rotational direction of the tines can be changed simply by shifting the transmission from “Grip” to “Drag”. As such, the machine is easy to adjust to all usage conditions.
- The quick-change tine with a length of 340 mm, and a thickness of 20 mm, guarantees maximum life span. The quick-change system ensures easy replacement of the tines with no tools required.
- For models with large working widths, the centrally located swing axles enable optimum adaptation to the ground contours.
- The Zirkon 10 can be specified for use at the front or rear of the tractor.
Zirkon 10 mounted, rigid
| Type | 10/300 | 10/350 | 10/400 |
|---|---|---|---|
| Working width (cm) | 300 | 350 | 400 |
| Weight (kg)¹ | 922 | 1.035 | 1.149 |
| kW | 66 - 154 | 77 - 165 | 88 - 176 |
| HP | 90 - 210 | 105 - 225 | 120 - 240 |
| Up to PTO rpm (min-1) | 1.000 | 1.000 | 1.000 |
| Rotor speed (min-1) at 1.000 min-1 | 330/440 | 330/440 | 330/440 |
| ¹ Weight without roller |
Zirkon 10 K mounted, hydraulic folding
| Type | 10/400 K | 10/450 K | 10/500K | 10/600 K |
|---|---|---|---|---|
| Working width (cm) | 400 | 450 | 500 | 600 |
| Weight (kg)¹ | 1.792 | 1.926 | 2.096 | 2.482 |
| kW | 88 - 199 | 99 - 199 | 121 - 221 | 132 - 235 |
| HP | 120 - 270 | 135 - 270 | 165 - 300 | 180 - 320 |
| Up to PTO rpm (min-1) | 1.000 | 1.000 | 1.000 | 1.000 |
| Rotor speed (min-1) at 1.000 min-1 | 330/440 | 330/440 | 330/440 | 330/440 |
| ¹ Weight without roller |
Zirkon 10 KA semi-mounted, hydraulic folding
| Type | 10/400 KA | 10/450 KA | 10/500 KA | 10/600 KA |
|---|---|---|---|---|
| Working width (cm) | 400 | 450 | 500 | 600 |
| Weight (kg)¹ | 3.561 | 3.764 | 3.953 | 4.447 |
| kW | 88 - 199 | 99 - 199 | 121 - 221 | 132 - 235 |
| HP | 120 - 270 | 135 - 270 | 165 - 300 | 180 - 320 |
| Up to PTO rpm (min-1) | 1.000 | 1.000 | 1.000 | 1.000 |
| Rotor speed (min-1) at 1.000 min-1 | 330/440 | 330/440 | 330/440 | 330/440 |
| ¹ Weight without roller |
Zirkon 10
- Lower link attachment Cat. 3N=L2 Z3 (or Cat. 3 or Cat. 2)
- Toolboxes with tools
- PTO shaft with torque limiting clutch for 1000 and 540 PTO
- Two-speed change gear box with changing turning direction
- Carriers for track markers and wheelmark eradicators
- Rear PTO 1 3/8" - 6 splines
- Specially hardened quick-change tines set to drag position (option to grade position)
- Spring-loaded side shields adjustable in height
- Without roller
Zirkon 10 K
- Lower link attachment Cat. 3
- Toolboxes with tools
- Power harrow drive at both sides protected with 2x PTO shaft with torque limiting clutches (1000 rpm)
- Two-speed change gear box with changing turning direction
- Carriers for track markers and wheelmark eradicators
- Rear PTO 1 3/4" - 6 splines
- Specially hardened quick-change tines set to drag position (option to grade position)
- Spring-loaded side shields adjustable in height
- Without roller
Zirkon 10 KA
- Drawbar eye Ø 50 mm, for connection to a double lashing drawbar (or Ø 58 mm or Ø 40 mm)
- Power harrow drive at both sides protected with 2x PTO shaft with torque limiting clutches (1000 rpm)
- Two-speed change gear box with changing turning direction
- Rear PTO 1 3/4" - 6 splines
- Carriers for track markers and wheelmark eradicators
- Specially hardened quick-change tines set to drag position (option to grade position)
- Spring-loaded side shields adjustable in height
- Axle with wheels 550/60-22.5, 1,230 x 550 mm
- Without roller
- Without lighting equipment
additional images are available in our database
