Other users searched for

Country Site

Language

Korund 8

  • From 3 m to 12 m working width
  • Tractors between 65 - 420 hp | 48 - 309 kW
  • Passive seedbed combinations
Korund 8 in action
Korund 6 meter
Korund 8 rear view

Powerful alternative in seedbed preparation with various equipment options

The Korund seedbed combination is characterised by particularly good levelling, loosening and grubbing with a high degree of surface coverage. It capacity, due to its various tine options, is demonstrated in professional potato or maize cultivation.

Contact your dealer!

Korund 8

  • Short and compact design
  • Flexible support arms
  • Deep or flat seedbed preparation
  • Toothed bar crumblers with maintenance free ball bearings

Short, compact & light

Its short and compact design provides a favourable centre of gravity and thus enables the use of tractors with lower lifting power. Due to its light weight, the machine can be used in large working widths on the tractor threepoint hitch.

Korund 8 compact design

Flexible support arms for durability

The flexible support arms made from It’s special spring steel can absorb high impact loads and thus protect the tractor and appliance.

Korund 8 flexible support arms

The right tine for every deep

To achieve an even loosening effect, tine sections with marathon or gamma tines for deep seedbed preparation are available, and for the flatter seedbed preparation duckfoot tines are recommended.

Korund 8 loosening effect

Spring loaded multi-bar saves fuel

The planing effect of the spring loaded multi-bar means an optimum seedbed is produced, even under difficult conditions such as deep tractor ruts or uneven ploughed surfaces. Thus the tine sections can work less deep which saves fuel.

Korund 8 spring loaded multi-bar

Optimal crumbling

Toothed bar crumblers with maintenance free ball bearings provide precise depth guidance as well as optimal crumbling and levelling.

Korund 8 toothed bar crumblers

Select a model

  • MAR = Marathon tines with point four rows
  • GAM = Gamma tines with point
  • GAR = Small spring tines, straight with point five rows
  • K = Foldable

Technical data

Korund 8/300 MAR Korund 8/300 GAR Korund 8/300 GAM Korund 8/450 K MAR Korund 8/450 K GAR Korund 8/450 K GAM Korund 8/600 K MAR Korund 8/600 K GAR Korund 8/600 K GAM Korund 8/750 K MAR Korund 8/750 K GAR Korund 8/750 K GAM Korund 8/900 K MAR Korund 8/900 K GAR Korund 8/900 K GAM
Working width (cm) 300 300 300 450 450 450 600 600 600 750 750 750 900 900 900
Power requirements (hp) from - to 65 - 115 65 - 115 65 - 115 95 - 145 95 - 145 95 - 145 105 - 175 105 - 175 105 - 175 125 - 215 125 - 215 125 - 215 145 - 245 145 - 245 145 - 245
Power requirements (kW) from - to 48 - 85 48 - 85 48 - 85 70 - 107 70 - 107 70 - 107 77 - 129 77 - 129 77 - 129 92 - 158 92 - 158 92 - 158 107 - 180 107 - 180 107 - 180
Weight (kg) 872 848 872 1 410 1 374 1 410 1 952 1 904 1 952 2 860 2 800 2 860 3 268 3 196 3 268
Article number 728 1720 728 1740 728 1730 728 1721 728 1741 728 1731 728 1722 728 1742 728 1732 728 1723 728 1743 728 1733 728 1724 728 1744 728 1734
Tine rows 4 5 4 4 5 4 4 5 4 4 5 4 4 5 4
Number of tines 32 50 32 48 75 48 64 100 64 80 125 80 96 150 96

Basic equipment

  • Lower link attachment 3 m: Cat. 2 (or Cat. 3N=L2 Z3 or Cat. 3) 4.5 m - 6 m: Cat. 3N=L2 Z3 (or Cat. 3) 7.5 m - 9 m: Cat. 3 (or Cat. 3N=L2 Z3 or 4N=L3 Z4)
  • Box section frame with spring steel carrier arms
  • Spring loaded multi-bar, front
  • Double toothed bar crumbling rollers Ø 330 mm / Ø 270 mm
  • Working sections four or five rows
  • Device for parking in folded-in position
  • Hydraulic transport locking device with working widths of 7.5 m and 9.0 m

The availability and basic equipment of the machine may vary depending on the country. Please contact your dealer.

Brochure

Download

Select a brochure

File type:
PDF
Size:
1.83 MB

Download

Select a brochure

Download
Contact