Perfect ploughing – with the new OptiLine adjustment system for ploughing without side pull

With over 4000 models sold, the Diamant 11 has been the stand-out performer among the range of large LEMKEN ploughs – reason enough for LEMKEN, the plough specialist, to make its successor, Diamant 16, even better in terms of fuel consumption and operating comfort. As a result, OptiLine now provides the first and to date only adjustment system for this type of plough design to prevent lateral pull during ploughing – a new feature that has already been awarded a DLG Silver medal. The range of applications for this plough has also been broadened to cater for larger tractors with greater pulling power.

Seitenzugfreie Pflugarbeit durch OptiLine

OptiLine kompensiert den Seitenzug, der durch die asymmetrische Anordnung des Pfluges hinter dem Traktor entsteht. Dazu wird durch einen druckgesteuerten Zylinder ein zusätzliches Drehmoment auf den Traktor übertragen und die Traktor/Pflug-Zuglinie verlagert sich zur Mitte der Hinterachse. Bis zu 10 % weniger Kraftstoff wird dadurch verbraucht. Auch der Fahrer wird entlastet, da er nicht mehr gegenlenken muss.

Zur Kraftstoffreduzierung trägt außerdem der bewährte Traktionsverstärker mit Druckentlastung am Vorgewende bei. Die so möglichen höhere Systemdrücke verstärken die Gewichtsverlagerung auf die Traktorhinterachse und das Gespann gewinnt noch mehr Zugkraft.

In der Onland Version sind Traktoren mit bis zu vier Meter Außenbreite einsetzbar. Damit besteht auch in schwierigen Bedingungen immer ein ausreichender Abstand der Räder zur Furchenkante.

    • The OptiLine adjustment system eliminates side pull to deliver fuel savings of up to 10 per cent
    • Traction booster for enhanced system pressure, greater transfer of weights onto the rear axle and thus improved traction
    • Greater operator comfort through optional continuously adjustable hydraulic working depth adjustment from the tractor cab
    • Improved onland version for using large twin-tyre or tracked tractors with larger distances from the furrow edge and more space for turning
    • Hydraulic lines routed on the side of the frame for protection against damage
    Diamant 16 7+1 L 120 Diamant 16 7 L 120 Diamant 16 6+1 L 120 Diamant 16 6 L 120 Diamant 16 5+1 L 120 Diamant 16 5 L 120 Diamant 16 8+1 L 100 Diamant 16 8 L 100 Diamant 16 7+1 L 100 Diamant 16 7 L 100 Diamant 16 6+1 L 100 Diamant 16 5+1 L 100 Diamant 16 5 L 100 Diamant 16 6 L 100
    Tractor output (HP) ab 180 ab 150 ab 150 ab 150 ab 150 ab 150 ab 180 ab 180 ab 150 ab 150 ab 150 ab 150 ab 150 ab 150
    Tractor output (kW) ab 132 ab 110 ab 110 ab 110 ab 110 ab 110 ab 132 ab 132 ab 110 ab 110 ab 110 ab 110 ab 110 ab 110
    Weight (kg) 3.412 3.150 3.154 2.892 2.896 2.634 3.572 3.322 3.326 3.076 2.830 2.834 2.584 2.830
    Working width (cm) 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50
    Number of furrows 7+1 7 6+1 6 5+1 5 8+1 8 7+1 7 6+1 5+1 5 6
    Interbody clearance (cm) 120 120 120 120 120 120 100 100 100 100 100 100 100 100
    Diamant 16 T 7+1 L 100 Diamant 16 T 7 L 100 Diamant 16 T 6+1 L 100 Diamant 16 T 6 L 100 Diamant 16 T 5+1 L 100 Diamant 16 T 5 L 100
    Tractor output (HP) ab 180 ab 150 ab 150 ab 150 ab 150 ab 150
    Tractor output (kW) ab 132 ab 110 ab 110 ab 110 ab 110 ab 110
    Weight (kg) 3.683 3.384 3.393 3.094 3.103 2.804
    Working width (cm) 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50
    Number of furrows 7+1 7 6+1 6 5+1 5
    Interbody clearance (cm) 100 100 100 100 100 100
    Diamant 16 V 6+1 L 120 Diamant 16 V 6 L 120 Diamant 16 V 5+1 L 120 Diamant 16 V 5 L 120 Diamant 16 V 8+1 L 100 Diamant 16 V 8 L 100 Diamant 16 V 7+1 L 100 Diamant 16 V 7 L 100 Diamant 16 V 6+1 L 100 Diamant 16 V 6 L 100 Diamant 16 V 5+1 L 100 Diamant 16 V 5 L 100
    Tractor output (HP) ab 150 ab 150 ab 150 ab 150 ab 180 ab 180 ab 150 ab 150 ab 150 ab 150 ab 150 ab 150
    Tractor output (kW) ab 110 ab 110 ab 110 ab 110 ab 132 ab 132 ab 110 ab 110 ab 110 ab 110 ab 110 ab 110
    Weight (kg) 3.448 3.124 3.153 2.829 3.912 3.602 3.631 3.321 3.350 3.040 3.069 2.759
    Working width (cm) ca. 30-60 ca. 30-60 ca. 30-60 ca. 30-60 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50
    Number of furrows 6+1 6 5+1 5 8+1 8 7+1 7 6+1 6 5+1 5
    Interbody clearance (cm) 120 120 120 120 100 100 100 100 100 100 100 100
    Diamant 16 V T 6+1 L 120 Diamant 16 V T 6 L 120 Diamant 16 V T 5+1 L 120 Diamant 16 V T 5 L 120 Diamant 16 V T 7+1 L 100 Diamant 16 V T 7 L 100 Diamant 16 V T 6+1 L 100 Diamant 16 V T 6 L 100 Diamant 16 V T 5+1 L 100 Diamant 16 V T 5 L 100
    Tractor output (HP) ab 150 ab 150 ab 150 ab 150 ab 180 ab 150 ab 150 ab 150 ab 150 ab 150
    Tractor output (kW) ab 110 ab 110 ab 110 ab 110 ab 132 ab 110 ab 110 ab 110 ab 110 ab 110
    Weight (kg) 3.761 3.388 3.422 3.049 3.988 3.629 3.663 3.304 3.338 2.979
    Working width (cm) ca. 30-60 ca. 30-60 ca. 30-60 ca. 30-60 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50 ca. 30-50
    Number of furrows 6+1 6 5+1 5 7+1 7 6+1 6 5+1 5
    Interbody clearance (cm) 120 120 120 120 100 100 100 100 100 100
    • Headstock with lower link attachment Cat. 3 (or Cat. 3N=L2 Z3, Cat. 4N= L3 Z4 or Cat. 4)
    • Box section frame 160 x 160 x 10 mm
    • Toolbox, tools and shearbolts
    • Stand
    • Underframe clearance 80 cm
    • Complete hydraulic equipment
    • Hydraulic working depth adjustment
    • Wheel 400/55-22.5, 1.020 x 400 mm with suspension and schock absorber
    • Two-piece shares, hard-faced (option: hard-faced one-piece stone shares)
    • Shape of Dural bodies B, C or W
    • Headstock with lower link attachment Cat. 3 (or Cat. 3N=L2 Z3, Cat. 4N= L3 Z4 or Cat. 4)
    • Box section frame 160 x 160 x 10 mm
    • Toolbox, tools and shearbolts
    • Stand
    • Underframe clearance 80 cm
    • Complete hydraulic equipment
    • Hydraulic working depth adjustment
    • Wheel 400/55-22.5, 1.020 x 400 mm with suspension and schock absorber
    • Two-piece shares, hard-faced (option: hard-faced one-piece stone shares)
    • Shape of Dural bodies B, C or W
    • Headstock with lower link attachment Cat. 3 (or Cat. 3N=L2 Z3, Cat. 4N= L3 Z4 or Cat. 4)
    • Box section frame 160 x 160 x 10 mm
    • Toolbox, tools and shearbolts
    • Stand
    • Underframe clearance 80 cm
    • Complete hydraulic equipment
    • Hydraulic working depth adjustment
    • Wheel 400/55-22.5, 1.020 x 400 mm with suspension and schock absorber
    • Two-piece shares, hard-faced (option: hard-faced one-piece stone shares)
    • Shape of Dural bodies B, C or W
    • Headstock with lower link attachment Cat. 3 (or Cat. 3N=L2 Z3, Cat. 4N= L3 Z4 or Cat. 4)
    • Box section frame 160 x 160 x 10 mm
    • Toolbox, tools and shearbolts
    • Stand
    • Underframe clearance 80 cm
    • Complete hydraulic equipment
    • Hydraulic working depth adjustment
    • Wheel 400/55-22.5, 1.020 x 400 mm with suspension and schock absorber
    • Two-piece shares, hard-faced (option: hard-faced one-piece stone shares)
    • Shape of Dural bodies B, C or W

    Fotos