Zirkon 12/300 | Zirkon 12/350 | Zirkon 12/400 | Zirkon 12/450 | |
Body Spacing | 300 | 350 | 400 | 450 |
Tractor output (HP) | 90 - 210 | 105 - 225 | 120 - 240 | 120 - 240 |
Tractor output (kW) | 66 - 154 | 77 - 165 | 88 - 176 | 88 - 176 |
Weight (kg) | 922 | 1035 | 1149 | 1261 |
Number of Rotors | 12 | 14 | 16 | 18 |
PTO rpm | 1000 | 1000 | 1000 | 1000 |
Rotor speed (rpm) | 440 | 440 | 440 | 440 |
Zirkon 12/400 K | Zirkon 12/450 K | Zirkon 12/500 K | Zirkon 12/600 K | |
Body Spacing | 400 | 450 | 500 | 600 |
Tractor output (HP) | 120 - 270 | 135 - 270 | 165 - 300 | 180 - 320 |
Tractor output (kW) | 88 - 199 | 99 - 199 | 121 - 221 | 132 - 235 |
Weight (kg) | 1762 | 1896 | 2066 | 2452 |
Number of Rotors | 16 | 18 | 20 | 24 |
PTO rpm | 1000 | 1000 | 1000 | 1000 |
Rotor speed (rpm) | 440 | 440 | 440 | 440 |
Zirkon 12/400 KA | Zirkon 12/450 KA | Zirkon 12/500 KA | Zirkon 12/600 KA | |
Body Spacing | 400 | 450 | 500 | 600 |
Tractor output (HP) | 120 - 270 | 135 - 270 | 165 - 300 | 180 - 320 |
Tractor output (kW) | 88 - 199 | 99 - 199 | 121 - 221 | 132 - 235 |
Weight (kg) | 3531 | 3734 | 3923 | 4447 |
Number of Rotors | 16 | 18 | 20 | 24 |
PTO rpm | 1000 | 1000 | 1000 | 1000 |
Rotor speed (rpm) | 440 | 440 | 440 | 440 |
- Lower link attachment: Cat. 3N=L2 Z3 3 m: or Cat. 2 3 m - 4.5 m: or Cat. 3
- Toolboxes with tools
- Bondioli & Pavesi PTO shaft with torque limiting clutch for 540 and 1000 PTO
- Two-speed change gear box with changing turning direction for tractors up to 240 hp (dependent on working width)
- Rotor speed 330 rpm and 440 rpm (or 230 rpm and 330 rpm)
- Holders for track markers and wheelmark eradicators
- Rear PTO 1 3/8“ - 6 splines
- Specially hardened tines SG 30 set to drag position (option to grade position)
- Spring-loaded side shields adjustable in height
- Without roller
- Lower link attachment Cat. 3 (or Cat. 4N=L3 Z4)
- Toolboxes with tools
- Bondioli & Pavesi PTO shafts
- Power harrow drive at both sides protected by PTO shafts with torque limiting clutches (1000 rpm)
- Holders for track markers and wheelmark eradicators
- Angular gear box (non shiftable) for tractors up to 320 hp (dependent on working width)
- Rotor speed 330 rpm (or 230 rpm or 440 rpm)
- Changing turning direction (via side gearbox)
- Specially hardened tines SG 30 set to drag position (option to grade position)
- Spring-loaded side shields adjustable in height
- Without roller
- Drawbar eye Ø 50 mm, for connection to a double lashing drawbar (or Ø 58 mm or Ø 40 mm)
- Bondioli & Pavesi PTO shafts
- Power harrow drive at both sides protected by PTO shafts with torque limiting clutches (1000 rpm)
- Holders for track markers and wheelmark eradicators
- Angular gear box (non shiftable) for tractors up to 320 hp (dependent on working width)
- Rotor speed 330 rpm (or 230 rpm or 440 rpm)
- Changing turning direction (via side gearbox)
- Specially hardened tines SG 30 set to drag position (option to grade position)
- Spring-loaded side shields adjustable in height
- Axle with wheels 560/60-22.5, 1,230 x 560 mm
- Without roller
- Without lighting equipment
- Without brake system