Other users searched for

Country Site

Language

Diamant 16

  • From 5 to 9 furrows
  • Tractors from 110 kW | 150 hp
Aufsattelpflug Diamant 16 von LEMKEN
Diamant 16 aerial view
Diamant 16 hydraulic supply pipes
Diamant 16 aerial view
Diamant 16 side view

The semi-mounted plough for the highest requirements

Diamant 16 is built for performance and equipped with all our technologies to help you achieve a high level of productivity. On the road or in the field, you will appreciate the comfort!

Contact your dealer!

Diamant 16: easy handling & high efficiency

  • For more clearance
  • Traction booster
  • OptiLine adjustment system
  • OF-Version
  • Horizontal draw point adjustment
  • Reliable & long service life

For more clearance

The large clearance between the plough headstock and tractor permits a steering angle of up to 90°. The transport wheel is automatically controlled during plough rotation.

The optimal interaction between the reversing mechanism and transport wheel:

  • Allows easy, rapid turning even on narrow headlands
  • Also in hilly or difficult terrain
Diamant 16 clearance

More grip, better traction

Diamant 16 ploughs can be fitted with an optional traction booster.

  • An additional hydraulic cylinder transfers weight to the tractor’s rear axle to boost its traction.
  • This “smart ballasting” system reduces slip and therefore saves fuel.
  • As soon as the hydraulic system raises the plough frame via the transport wheel, the pressure in the traction booster is automatically reduced to ensure that full tractor stability is maintained at all times. As soon as the transport wheel is lowered, pressure is automatically increased again.
     
Diamant 16 traction increase device

OptiLine: Pull smart, save fuel

  • Fuel savings of up to 10%
  • No need for operators to counter-steer, resulting in considerably less operator strain
  • Set hydraulic pressure for optimal landside pressure and minimal side pull in the tractor
  • Optimal landside pressure for even front furrow widths and consistent results
Diamant 16 Optiline

Onland or in the furrow? OF can do both!

In the OF-Version the Diamant 16 is usable in the furrow or Onland.

  • Also usable with wide, gentle to soils tyres or tractors with crawler tracks
  • Easy switch to plouhing in the furrow at wet soil surface
Diamant 16 Onland

Horizontal draw point adjustment

The height of the horizontal draw point is easily adjusted simply by repositioning a pin (optional with OF version).

  • This allows a precise load transfer to the rear axle of the tractor.
  • When using crawler tracks, the draw point is set very low to ensure that even loads are applied to the tracks.
  • Slip is minimised on all tractors through the optimal transfer of tractive forces.
Diamant 16 horizontal draw point

Superior safety & reliability

All main bearings feature highly robust spherical plain bearings.

  • Particularly long service life
  • Ensure high reliability of operation
Diamant 16 main bearings

Quality & safety on the road

The semi-mounted reversible plough is rotated into its centre position and locked via two stop valves for quick and safe road transport.

  • Safely towed behind the tractor (like any single-axle trailer)
  • Protection against excessive loads through a damper for the transport wheel
  • The ModuLight LED provides maximum safety
Diamant 16 transport on the street

Comfortable working depth adjustment

The large transport wheel minimises soil compaction during ploughing and ensures the required safety for road transport.

  • Hydraulic/mechanical working depth setting (standard equipment)
  • Optional: setting of working depth hydraulic/electrical
  • Easy-to-read display
  • Lifting cylinder protected against dirt
  • The hydro-pneumatic suspension absorbs major impact loads
  • A range of wheel sizes is available upon request
Diamant 16 depth adjustment

Select a model

  • L = Long frame
  • V = Hydraulic working width adjustment
  • U = Hydraulic Non-Stop overload safety device OptiStone

Technical data

Diamant 16 5 L 100 Diamant 16 5+1 L 100 Diamant 16 6 L 100 Diamant 16 6+1 L 100 Diamant 16 7 L 100 Diamant 16 7+1 L 100 Diamant 16 8 L 100 Diamant 16 8+1 L 100 Diamant 16 5 L 120 Diamant 16 5+1 L 120 Diamant 16 6 L 120 Diamant 16 6+1 L 120 Diamant 16 7 L 120 Diamant 16 7+1 L 120
Power requirements (hp) minimum of 150 150 150 150 150 150 180 180 150 150 150 150 150 180
Power requirements (kW) minimum of 110 110 110 110 110 110 132 132 110 110 110 110 110 132
Weight (kg) 2 584 2 834 2 830 3 080 3 076 3 326 3 322 3 572 2 634 2 896 2 892 3 154 3 150 3 412
Article number 80 4001L 80 4002L 80 4003L 80 4004L 80 4005L 80 4006L 80 4007L 80 4008L 80 4009L 80 4010L 80 4011L 80 4012L 80 4013L 80 4014L
Working width per furrow (cm) 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 33, 38, 44, 50 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60 40, 45, 53, 60
Number of furrows 5 5+1 6 6+1 7 7+1 8 8+1 5 5+1 6 6+1 7 7+1
Body spacing (cm) 100 100 100 100 100 100 100 100 120 120 120 120 120 120

Basic equipment

  • Headstock with lower link attachment Cat. 3 (or Cat. 3N=L2 Z3, Cat. 4N= L3 Z4 or Cat. 4)
  • Box section frame 160 x 160 x 10 mm
  • Toolbox, tools and shearbolts
  • Stand
  • Underframe clearance 80 cm
  • Mechanical depth adjustment 
  • Wheel 400/55-22.5, 1.020 x 400 mm with suspension and schock absorber
  • Two-piece shares, hard-faced (option: hard-faced one-piece stone shares or points in angled version)
  • Shape of Dural bodies B, C, D or W

The availability and basic equipment of the machine may vary depending on the country. Please contact your dealer.

Brochure

Download

Select a brochure

File type:
PDF
Size:
2.70 MB

Download

Select a brochure

Download

Experience with the Diamant 16

We respect your data. Accept the cookies to see the video!

Contact