Compact disc harrow with deep impact

With the Rubin 12, LEMKEN’s range of compact disc harrows includes an implement that can operate at the same 20 cm working depth as a cultivator. The Rubin 12 is therefore suitable both for stubble cultivation and for primary soil tillage, even in very heavy soil conditions.

  • Two rows of serrated concave discs with a diameter of 736 mm produce intensive mixing and crumbling.
  • The symmetrical arrangement of the discs in each row enables working without lateral pull, even at high driving speeds.
  • The 20° angle of the discs to the soil and the 16° angle to the direction of travel ensure optimum penetration and enable cultivation across the full width from a working depth of 7 cm.
  • The legs are specially curved and coiled and thus provide maximum clearance between the discs. This prevents blockages, along with the slight offset of the middle discs.
  • High speeds of travel at reduced slip result in lower fuel consumption and a higher acreage performance.
  • An impact harrow behind the first row of discs produces intensive mixing and crumbling, while a levelling harrow behind the second row distributes and levels the soil optimally.
  • In the mounted version, the Rubin 12 can be equipped with a Uni wheel, which transfers loads to the front axle when the implement is raised. This version includes a novel semi-mounting system that does not require an additional control unit.
Rubin 12/300 U Rubin 12/350 U Rubin 12/400 U
Body Spacing 300 350 400
Tractor output (HP) 135 - 240 158 - 280 180 - 320
Tractor output (kW) 99 - 177 116 - 206 132 - 235
Weight (kg) 2046 2141 2616
Discs 18 18 22
Discs diameter 736 736 736
Rubin 12/400 KUA Rubin 12/500 KUA Rubin 12/600 KUA Rubin 12/700 KUA
Body Spacing 400 500 600 700
Tractor output (HP) 180 - 320 225 - 400 270 - 480 315 - 560
Tractor output (kW) 132 - 235 165 - 294 199 - 353 232 - 412
Weight (kg) 4402 5257 5732 6630
Discs 22 30 34 42
Discs diameter 736 736 736 736
  • Ohne Walze
  • Unterlenkeranschluss Kat. 3 (wahlweise Kat. 3N=L2 Z3 oder 4N=L3 Z4)
  • Rahmenhöhe 80 cm
  • Integrierter Prallstriegel hinter erster Scheibenreihe, Nivellierstriegel hinter zweiter Scheibenreihe
  • Einklappbare äußere Hohlscheiben
  • Hohlscheiben 736 x 6 mm gezackt mit automatischer Überlastsicherung
  • Seitenschilde
  • Ohne Walze
  • Ohne Beleuchtungsanlage
  • Ohne Bremsanlage
  • Integrierte Aufsatteleinrichtung
  • Achse mit Radgröße 550/45-22.5
  • Unterlenkeranschluss Kat. 3 (wahlweise Kat. 3N=L2 Z3, 4N=L3 Z4 oder 4=L4 Z4)
  • Rahmenhöhe 80 cm
  • Integrierter Prallstriegel hinter erster Scheibenreihe, Nivellierstriegel hinter zweiter Scheibenreihe
  • Hohlscheiben 736 x 6 mm gezackt mit automatischer Überlastsicherung
  • Hydraulische Transportverriegelung
  • Hydraulische Arbeitstiefeneinstellung
  • Seitenschilde

Videos